Skip to main content


Avetta has launched Subcontractor Management Solution! Click here

Avetta clients and Suppliers who use the Avetta Connect™ platform experience fewer workplace safety incidents

By Avetta Marketing
November 10, 2020
7 minutes
Avetta clients and Suppliers who use the Avetta Connect™ platform experience fewer workplace safety incidents

Data analysis of 87,000 suppliers shows safety incidents reduced from 21% to 55% and safety performance increased 7% to 12% yearly. The longer companies are in the Avetta network, the safer they become

11 Nov 2020—Orem, Utah— Analysis by Avetta® ( of 87,000 suppliers worldwide shows clients and suppliers that use the Avetta Connect™ Platform reduce the number of safety incidents and lost work days by as much as 55% compared to industry averages. The longer these companies use Avetta’s supply chain risk management technology, the safer they become — with some yielding a 7% to 12% reduction in workplace safety incidents year over year for as many as 10 years.

Avetta examined hundreds of thousands of safety data points and supplier performance reports over multiple years in 20-plus industries over a 10-year period.

“We improve what we can measure. When clients and suppliers are held to a higher safety standard and have the right technology to track performance, they achieve those outcomes across the supply chain,” said Arshad Matin, Avetta President and Chief Executive Officer. “Making those corrections decreases expenses, reduces accidents and protects brands, leading to lives saved.”

The report shows these suppliers improved safety performance even more over time, accelerating improvement the longer they used supply chain risk management technology.

United States
In the United States, suppliers who participate in prequalification measurements see about a 20% reduction in Total Recordable Incidents Rate (TRIR), Days Away, Restricted or Transferred (DART) and Lost Workday Case Rate (LWCR) compared to the Bureau of Labor Statistics (BLS) averages. Those companies that utilise supplier audits as part of safety programmes see as much as a 52% reduction in those measures.

The longer companies use Avetta’s supply chain risk management system, the more workplace safety incidents are reduced. Over the past 10 years, suppliers have reduced TRIR, DART and LWCR an average of 7% to 8% year over year.

DART is a safety metric used by the U.S. Occupational Safety and Health Administration (OSHA) to track workplace injuries and illnesses that cause the affected employees to remain away from work, restrict their work activities or transfer to another job for safety reasons. LWCR is a similar calculation, but it uses the number of cases with lost workdays.

In Canada, suppliers participating in prequalification experience a 16% reduction in Total Recordable Incident Frequency (TRIF) and a 30% reduction in LWCR. When these companies included supplier audits, TRIF reduced by 26% and LWCR by 51% compared to industry averages.

Longevity with Avetta’s Connect™ Platform yields increasing safety improvements. Suppliers have reduced TRIF and LWCR an average of 6% to 7% year over year for up to eight years. TRIF calculates recordable incidents per 100 full-time workers over a year.

“Avetta-vetted suppliers are significantly safer than the industry averages — guaranteeing workers get home safely,” Matin said. “Companies that digitalise safety information with Avetta solutions are able to evaluate the ability of contractors or suppliers to operate safely. When clients implement these tools, the propensity to have a safer workplace goes up dramatically worldwide.”

Avetta Connect™ helps companies build resilience and continuity in their supply chains — from increasing visibility within the network and ensuring safety to managing risk and improving sustainability. Companies can easily customise the platform to track specific compliance requirements, financial stability, safety ratings and records.

European Union
In the European Union, clients utilising technology for prequalification for their suppliers reduced Accident Frequency Rate (AFR) by 21% and reduced the Incidence Rate (IR) by 50%.

Accident Frequency Rate (AFR) is the number of accidents per 1 million total hours. Incidence Rate (IR) is the number of fatal accidents and more than 3 days' absence per 100,000 employees (ESAW).

In Australia, supply chain risk management technology reduced their Total Recordable Injury Frequency Rate (TRIFR) by 17% and the Lost Time Injury Frequency Rate (LTIFR) by 19%.

In addition to immediate impacts on safety, Australian suppliers have seen a reduction of an average of 12% year over year in TRIFR for as much as five years.

Total Recordable Injury Frequency Rate (TRIFR) is the number of total recordable injuries per 1 million hours while Lost Time Injury Frequency Rate (LTIFR) is the number of fatalities and lost time injuries per 1 million hours.

Latin America
In Latin American countries, companies can see significant reductions in safety problems by implementing technology for supply chain risk management. Here are the reductions discovered for Lost Time Frequency Rate (LTFR), the measure for number of fatalities, permanent and temporary disabilities per 1 million total hours.

  • Brazil: -51%
  • Argentina: -25%

In Mexico, suppliers see reductions of 24% of TRIR and LWCR is reduced by 38% through supply chain risk management.

Avetta Connect™
Avetta’s platform, Avetta Connect™, helps companies worldwide with supply chain risk management, enterprise and workplace safety through contractor management and prequalification with a SaaS-based system that is the most configurable in the industry. Avetta Connect™ enables clients to configure goals, create and customise analytic dashboards, identify trends, modify processes and produce reports that will improve safety and compliance for their supply chain operations as verified by the data analysis. Avetta Connect™ also supports companies’ efforts regarding sustainability and environmental, social and governance (ESG) priorities.

About Avetta
Avetta leads the world in connecting leading global organisations across several industries including oil/gas, telecoms, construction materials, facilities management and many others, with qualified and vetted suppliers, contractors and vendors. The company brings unmatched access and visibility to its clients’ supply chain risk management process through its innovative and configurable technology, coupled with highly experienced human knowledge and insight. We contribute to the advancement of our clients’ sustainable growth by protecting supply chains from a wide range of potential risks through trusted contractor prequalification, safety training and monitoring, regulatory compliance, insurance/financial stability and other areas of risk. Avetta currently serves more than 450 enterprise companies and 100k suppliers across >100 countries. Visit for more information.

More from the Avetta News&Press

Contractor Management, C-Suite, Facilities, Health & Safety, Operations, Procurement, Risk Management, Sustainability
April 8, 2022
Contractor Management, C-Suite, Facilities, Health & Safety, Operations, Procurement, Risk Management, Sustainability
March 31, 2022
Contractor Management, C-Suite, Facilities, Health & Safety, Insurance, Legal, Operations, Procurement, Risk Management, Sustainability, Other
March 17, 2022
Upcoming Events
May 30 - June 1
Brisbane, Queensland, Australia
AIHS National Health & Safety Conference
May 31
Climate Change and Occupational & Environmental Health and Safety: Preparing for the Impacts
May 31-June 1
Houston, TX
LNG Export Engineering & Construction Conference
June 5-7
San Antonio, TX
Booth #1607
ASSP Safety 2023
June 8
Safety from the C-Suite
June 12-13
Ottawa, Ontario
Partners in Prevention - Ottawa
June 13
Beat the Heat: Protecting Your Workers from Heat Stress
June 15
New Free Resources for Strengthening Jobsite Safety Climate, Safety Leadership & Safety Management
June 27
Houston, TX
Customer Event
Avetta Houston Summit